Количество:
Личный кабинет
Низковольтный сервомотор AM8123 подходит для высокодинамичных приводных решений в компактном исполнении в диапазоне напряжения
| Номинальное напряжение | 24…48 V DC |
|---|---|
| Standstill torque | 1.00 Nm |
| Rated torque | 0.99 Nm |
| Peak torque | 6.36 Nm |
| Rated speed | 3000 min -1 |
| Rated power | 0.311 kW |
| Standstill current | 8.00 A |
| Peak current | 50.5 A |
| Torque constant | 0.125 Nm/A |
| Rotor moment of inertia | 0.373 kgcm² |
| Motor feedback | OCT, 24 bit, SIL 2-capable, single-turn or multi-turn absolute encoder, electronic nameplate OCT, EnDat ® 3, 19 bit, SIL 3-capable, single-turn or multi-turn absolute encoder, electronic nameplate |
| Охлаждение | convection |
| Технология подключения | itec ® plug |
| Ambient temperature (operation) | 5…40°C |
| Допуски/маркировки | CE, cURus |
| Конструктивное исполнение | flange-mounted according to IM B5, IM V1, IM V3 |
| Материал | aluminum |
| Coating/surface | acrylic powder-coated, dark gray, similar to RAL7016 |
| b | 9 k6 |
| d | 20 mm |
| l | 63 mm |
| r | 58 mm |
| k (without brake) | 155.5 mm |
| k (with brake) | 190 mm |
| Информация для заказа / AM8123-WJYZw = 0 | smooth shaft |
| w = 1 | shaft with groove and feather key according to DIN 6885 |
| w = 2 | shaft with IP65 sealing ring, smooth shaft (not for AM811x) |
| w = 3 | shaft with IP65 sealing ring, shaft with groove and feather key (not for AM811x) |
| x | winding code |
| y = G Preferred type | One Cable Technology for power and feedback: feedback transmission via motor cable, no feedback cable necessary, electronic nameplate, single-turn, absolute position within one revolution, resolution 24 bit, SIL 2-capable (Mandatory for TwinSAFE Safe Motion functions at ELM72xx-9018) |
| y = H Preferred type | One Cable Technology for power and feedback: feedback transmission via motor cable, no feedback cable necessary, electronic nameplate, multi-turn, absolute position within 4096 revolutions, resolution 24 bit, SIL 2-capable (Mandatory for TwinSAFE Safe Motion functions at ELM72xx-9018) |
| y = I | EnDat ® 3; One Cable Technology for power and feedback: feedback transmission via motor cable, no feedback cable necessary, electronic nameplate, single-turn, absolute position within one revolution, resolution 19 bit, SIL 3-capable (mandatory for TwinSAFE Safe Motion functions at ELM72xx-9018), only at ELM72xx | estimated market release 2nd quarter 2026 |
| y = J | EnDat ® 3; One Cable Technology for power and feedback: feedback transmission via motor cable, no feedback cable necessary, electronic nameplate, multi-turn, absolute position within 4096 revolutions, resolution 19 bit, SIL 3-capable (mandatory for TwinSAFE Safe Motion functions at ELM72xx-9018), only at ELM72xx | estimated market release 2nd quarter 2026 |
| z = 0 | without holding brake |
| z = 1 | with backlash-free permanent magnet holding brake |