Количество:
Личный кабинет
Вставной модуль EJ7342 EtherCAT обеспечивает непосредственное управление двумя двигателями постоянного тока. Он гальванически изолирован от E-bus. Скорость или положение задаются устройством автоматизации посредством 16-битного значения. Подключение инкрементального энкодера позволяет реализовать простую сервоось....
| Технология подключения | direct motor connection |
|---|---|
| Количество каналов | 2 |
| Количество входов | 1 x end position, 1 x encoder per channel |
| Количество выходов | 1 x DC motor per channel |
| Тип нагрузки | DC brush motor, inductive |
| Supply voltage power | 8…48 V DC (via distribution board) |
| Supply voltage electronics | 24 V DC (via signal distribution board) |
| Выходной ток | max. 3.5 A per channel |
| PWM clock frequency | 32 kHz with 180° phase shift each |
| Коэффициент заполнения | 0…100% (voltage-controlled) |
| Разрешение | max. 10 bit current, 16 bit speed |
| Encoder input signal | 5…24 V DC, typ. 5 mA, single-ended |
| Input frequency | max. 400,000 increments/s (with 4-fold evaluation) |
| Ток вспомогательного питания | typ. 45 mA (via distribution board) |
| Потребляемый ток E-bus | typ. 160 mA |
| Distributed Clocks | yes |
| Гальваническая развязка | 500 V (E-bus/field potential) |
| Особые характеристики | travel distance control, encoder input |
| Вес | approx. 50 g |
| Температура хранения | -25…+85°C |
| Относительная влажность | 95%, no condensation |
| ЭМС | помехоустойчивость/эмиссия: conforms to EN 61000-6-2/EN 61000-6-4 |
| Устойчивость к вибрации/ударам | conforms to EN 60068-2-6/EN 60068-2-27 |
| Степень защиты/монтажное положение | IP20/see documentation |
| Допуски/маркировки | CE, UL |
| Степень защиты | IP20 |
| Материал | polycarbonate |
| Размеры | Ширина (одинарная) | 24 mm |
| Размеры | Высота | 66 mm |
| Размеры | Глубина | 55 mm |
| Монтаж | 2 x 20-pin socket strip on signal distribution board |
| Механизм подключения | application-specific plug on the signal distribution board |
| Механическое кодирование | yes |
| Положение кодирующих штифтов | 1, 8 |
| Информация для заказа / EJ7342CAS No. | 7439-92-1 |
| REACH SVHC | Lead |
| REACH Annex XVII | compliant |
| REACH Annex XIV | compliant |
| SCIP No. | 7d3138ef-fadf-47a6-9a6c-5de296a458ba |
| POP | compliant |
| RoHS | compliant with exemption |
| Исключение RoHS | 7a: Lead in solders with a high melting point with a minimum mass fraction of 85% lead, 7c-I: Lead-containing electrical and electronic components in glass and ceramic materials, excluding dielectric ceramics in capacitors |
| China-RoHS | www.beckhoff.com/china-rohs-io |
| CA Prop65 | www.beckhoff.com/prop65 |
| Отказ от ответственности | This statement and the information contained above are, to the best of our knowledge and belief, accurate, based on the information we have received from our suppliers. This information is in line with the current standard of technology and our suppliers’ technical documentation. The absence of the substances is not verified by Beckhoff Automation by means of analytical tests. When addressed to our customers any information contained in this document is subject to the terms and conditions expressed in the governing customer agreement. Our general terms and conditions apply. |